The banknote binding machine is turned from the banknote to the manipulator, the currency value adjustment device, the mechanical pressing device, the sticking and cutting device, the cross sticking device, the belt conveyor, the automatic belt collecting mechanism, the safety guarantee
It is composed of protection, fault alarm device and dust removal device.
1. The banknote steering manipulator is composed of a steering motor, a gear transmission mechanism, a connecting rod, a steering mechanism and a telescopic clip. The gear on the output shaft of the steering motor is connected with the main transmission gear through an intermediate wheel, and the main transmission gear is connected with the teeth on the manipulator assembly bracket. The bars are engaged with each other, and a crank is fixed above the mandrel of the main transmission gear. The crank is connected with one end of the two parallel connecting rods, and the other ends of the two parallel connecting rods are connected with the gear.
2. The gear is connected with the missing tooth gear through the cylindrical intermediate wheel, and the missing tooth gear is fixed with the clip. The banknote clip is composed of multiple sections, which are positioned by the pull rod and the dead center tension spring. The plate is hinged, the upper pull rod is hinged with the upper pressure plate of the clamp, the other ends of the upper and lower rods are hinged together, and the pull rod and the clamp are positioned by the tension spring; on the manipulator assembly bracket, there are three working positions for controlling the steering manipulator. light control tube.
3. The front and rear adjustment device of the currency adjustment mechanism is that the motor is connected to the camshaft through a gear transmission pair. The cams on the camshaft are located in the grooves of the two sides of the manipulator assembly bracket, and one end of the camshaft is provided with a light control for controlling the moving position. The light blocking plate of the tube and the left and right adjustment device of the currency adjustment mechanism are the motor connected with the swing chute through the crank, and the pull plate connected with the rollers in the swing chute is fixed on the bracket of the manipulator assembly, and the shaft of the swing chute is provided with a control The light barrier of the light control tube in the mobile position.
4. The pressing mechanism has a worm gear fixed on the frame of the banknote binding machine to reduce the speed. The worm of the reducer is connected with the motor, the mandrel of the worm gear of the reducer is connected with the screw rod, the nut is located on the lower beam, and the lower beam passes through the guide. The column is connected to the upper beam.
5. The tape bonding motor of the lower bonding system is connected with the camshaft through the transmission mechanism, the tape guiding cam on the camshaft is in contact with the top tape and the tape guiding slider, and the tape cutting cam is in contact with the tape cutting and pressing slider; the top tape cam It is in contact with the slider of the top belt, the heating cam is in contact with the slider that controls the action of the swing rod of the heater, and the sliding plate cam is in contact with the slider that controls the reciprocating motion of the sticking and cutting slider. Each slider is provided with a return spring, and the motor shaft is provided with a Light Control Barrier.
6. The cross sticking system is on the top of the banknote bundle, the motor is connected with the camshaft through the gear pair, the heater cam on the camshaft is connected with the heater through the U-shaped pendulum rod, the connecting rod and the pendulum plate, and the pressure hammer cam is connected with the heater through the U-shaped pendulum The rod and the connecting rod are connected with the pressure hammer; both the heater and the pressure hammer are provided with return tension springs.
7. The automatic belt take-up mechanism of the pulley is composed of a mandrel, an end cover, a spring and a pulley, which is fixed on the bent plate of the frame. An energy storage spring is arranged inside, one end of the spring is fixed on the bent plate, and the other end is connected with the end cover through a friction pair.