The reasons are as follows: First, there is no response when you put money in, which is basically related to the bill depositing system. Either the sensor cable is not plugged in properly, or the sensor is damaged. Second: the banknotes are not counted after counting, either the code disc system is faulty or the counting part is faulty. Third: If you can take it apart, take off the casing. The plastic part with the money must have burrs and polish it. It's not a big problem. Fourth: It may be that the motor or belt is broken. Fifth: Maybe the plastic on the shaft is aging, and the dust inside the machine is also related, but don't rub oil. Sixth: If the counting and banknote inspection are normal, there is no need to apply for repairs. There may be two reasons:
1. The angle of the banknote holder is too small, and the banknotes are not separated;
2. The twisting wheel does not twist the bills due to wear and tear
Solution:
1. The banknote holder is the place where you put the banknotes. There are adjustment bolts at the rear, which can be adjusted and raised higher;
If the problem is not resolved, you can take:
2. Open the top cover of the money counter, where you said "the money card is turning" - a shaft is strung with several rubber wheels, there are adjustment bolts at both ends of the shaft, and the distance between the upper and lower wheels can be narrowed by twisting down a little . (It may be necessary to open the side cover of the cash counter depending on the model of the cash counter)
A banknote detector is a machine that verifies the authenticity of banknotes and counts the number of banknotes. Due to the large scale of cash flow and the heavy cash processing work at the bank teller counter, the money counter has become an indispensable equipment.
It integrates counting and counterfeiting. With the development of printing technology, copying technology and electronic scanning technology, the production level of counterfeit banknotes is getting higher and higher. It is necessary to continuously improve the counterfeiting performance of banknote counting machines. According to the different movement trajectories of banknotes, banknote counting machines are divided into horizontal and vertical banknote counting machines. There are usually three ways to distinguish fakes: fluorescence identification, magnetic analysis, and infrared penetration. Portable money detectors are divided into portable desktop laser money detectors and portable handheld laser money detectors.