Because the cash flow of the currency detector is relatively large, and the cash processing work at the bank teller counter is heavy, the currency detector has become an indispensable equipment. The counterfeit detector is a combination of counting and counterfeiting. With the development of printing technology, copying technology and electronic scanning technology, the level of counterfeit banknote manufacturing has become more and more developed, and the function of counterfeit counterfeiting is required. The currency detector is divided into two types: horizontal and vertical according to the different trajectories of banknotes. The counterfeit identification methods of the currency detector can also be divided into three methods: fluorescence identification, magnetic analysis, and infrared penetration. Portable currency detectors can be divided into portable desktop laser currency detectors and portable handheld laser currency detectors. Money detectors are widely used in major financial industries and places with cash flow. The main functions of the currency detector are cash counting, counterfeiting and sorting.
Money detector operation process
The prerequisite for the application of the currency detector is to turn on the main power switch. If you only need to count the ancient coins to distinguish the true from the false, then you only have to press the button to select the "counting" mode of work.
Then twist a stack of banknotes to a certain inclination and place them flat on the slide board. The device will automatically count the banknotes. When all the banknotes are transported on the slide board, the device will stop counting. The indicated data is the total number of the stack of banknotes. Remove the banknotes from the banknote holder, and the automatic control system for the marked value indicated on the display screen will be cleared and counted again every time the banknotes are checked.
When counting the banknotes, comb the banknotes. It is good to separate the banknotes according to different values and eliminate the paper subsidies and air pollutants on the banknotes. Then change the banknote fan into a small steep slope. Put it straight into the roll of money.
Incorrectly placing banknotes will cause false reports of real banknotes or the device reminds that banknote counting is prohibited. Please place the banknotes on the banknote receiver again, put them into the cash input table, and press the reset switch to check again. Properly discharging banknotes in the currency detector makes the judgment ability stronger, and the counting or counting of data is more appropriate.
When using general currency detectors, household appliances that are likely to have a strong impact on the power grid, such as mobile phones, DC welders, etc., should be prevented from strong light exposure and magnetic field effects to prevent false authentication. The twisting wheel, the rotating shaft and the frictional resistance eraser must not be stained with vegetable oil, otherwise it will cause deviation and cause counting prohibition.
Turn off the power and wait for at least 5 seconds after shutting down and then restart, otherwise it is likely to cause abnormal operation of the machine. The dust on the counter tube and each sensor should be cleaned up once a week. Just lift the top cover up and clean the dust with a brush. Pay attention to the power off before cleaning.
When the money receiving is not smooth or counting is prohibited, adjust the friction resistance between the vulcanized rubber sheet and the money twisting wheel according to the adjustment of the money receiving table screw, and then grab a banknote by hand and put it into the money twisting and friction resistance vulcanized rubber It's fine if you feel the tension resistance in the middle of the film. What should be noted here is: tighten it clockwise and release the pressure counter-clockwise.